Maryland State, County and Baltimore City Atlases

To view a complete list of available atlases scroll down to "This Collection" category on the left side of the screen and click on "Titles". When completed this collection will include images from over twenty atlas volumes with coverage for seventeen Maryland counties. Some atlases include more than one county. No atlases were published for Alleghany Co., Calvert Co., Charles Co., Garrett Co., Harford Co., and St. Mary’s Co.

Browse

Recent Submissions

Now showing 1 - 20 of 54
  • Item
    [Baltimore City] City of Baltimore One Hundred Foot Topographic/ Planimetric Map Series 1968
    (Baltimore: Baltimore City Department of Public Works, 1968) Baltimore City Department of Public Works
    Map Scale: 1:1,200 (1 inch = 100 feet)
  • Item
    [BALTIMORE CITY] Atlas of the City of Baltimore, MD - 1897 [SINGLE SHEETS]
    (Baltimore: Baltimore City Topographical Survey, 1897) Duncan, Frank K.; Ward, Thos. M.; Cudlipp, Malcolm A.; Wansleben, W.A.; Bauman, Wm., Jr.; MacGregor, R. A.
    During the years 1893-1896 the Baltimore City Topographical Survey published 39 separate topographic maps covering all areas within the boundaries of Baltimore City. Each map sheet covers one quadrant of a pre-defined grid system. The scale of each map sheet is 1:2,400 (1 inch = 200 feet) and the contour interval is five feet. The name(s) of the responsible cartographer(s) appear on each sheet along with the month and year that their work was completed. Cartographers include Thos. M. Ward, Malcolm A. Cudlipp, W.A. Wansleben, Frank K. Duncan, R.A. MacGregor and Wm. Bauman Jr. In 1897 all 39 of the individually map sheets published from 1893 –1896 were bound together to form a single volume titled “Atlas of the City of Baltimore, MD”. Images from the bound volume are also posted in JScholarship at https://jscholarship.library.jhu.edu/handle/1774.2/32745. The images posted here are from the separate topographic map sheets held by the Johns Hopkins, George Peabody Library. The size of each separate topographic map sheets is about 36 inches tall x 33 inches wide. Two of the sheets in the George Peabody Library (sheet 1N-1W and sheet 3N-1E) are photocopies. The library does not have original copies of these two sheets. As a result, posted here for sheet 1N-1W and 3N-1E are scans obtained from the original map sheets held by the American Geographical Society (AGS) Library at the University of Wisconsin Milwaukee. ¬¬¬¬¬¬We are indebted to the AGS staff for helping us make these images available.
  • Item
    Clarksville and Sandy Spring Quadrangles Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1994) Cleaves, Emery T.
    Quadrangle Atlas No. 26. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells and Springs (WS). Map 3. Depth to the Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Ground-Water Quality (GWQ). Map 6. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Woodbine and Damascus Quadrangles Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1994) Duigon, Mark T.
    Quadrangle Atlas No. 25. Includes Sheets: Map 1. Slope of the Land Surface (SLOP). Map 2. Locations of Wells and Springs (WS). Map 3. Depth to the Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Ground-Water Quality (GWQ). Map 6. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Sykesville Quadrangle Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1993) Duigon, Mark T.
    Quadrangle Atlas No. 24. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells and Springs (WS). Map 3. Depth to the Water Table (WT). Map 6. Geohydrologic Constraints on Septic Systems (SS). NOTE: Map 4 Groundwater, and Map 5 Groundwater Quality were not scanned.
  • Item
    Norrisville Quadrangle Hydrogeological Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1983) Otton, Edmond G.
    Quadrangle Atlas No. 23. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Depth to the Water Table (WT). Map 3. Availability of Ground Water (GW). Map 4. Geohydrologic Constraints on Septic Systems (SS). Map 5. Locations of Wells and Springs (WS).
  • Item
    Phoenix Quadrangle Hydrogeological Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1983) Otton, Edmond G.
    Quadrangle Atlas No. 22. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Depth to the Water Table (WT). Map 3. Availability of Ground Water (GW). Map 4. Geohydrologic Constraints on Septic Systems (SS). Map 5. Locations of Wells and Springs (WS).
  • Item
    Ellicott City Quadrangle Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1983) Duigon, Mark T.
    Quadrangle Atlas No. 21. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells and Springs (WS). Map 3. Depth to Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    New Freedom Quadrangle Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1983) Duigon, Mark T.
    Quadrangle Atlas No. 20. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells and Springs (WS). Map 3. Depth to Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Finksburg Quadrangle Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Williams III, James E.
    Quadrangle Atlas No. 19. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Depth to Water Table (WT). Map 3. Availability of Ground Water (GW). Map 4. Constraints on Installation of Septic Systems (SS). Map 5. Locations of Wells, Springs, and Test Holes (WS).
  • Item
    Hereford Quadrangle: Hydrogeology
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Duigon, Mark T.
    Quadrangle Atlas No. 18. Includes Sheets: Map 1. Slope of Land Surface (SLOPE). Map 2. Locations of Wells and Springs (WS). Map 3. Depth to Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Union Bridge and Woodsboro Quadrangles Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Weigle, James M.
    Quadrangle Atlas No. 17. Includes Sheets: Map 1. Slope of Land Surface (SLOPE). Map 2. Depth to the Water Table (WT). Map 3. Availability of Ground Water (GW). Map 5. Locations of Wells and Springs (WS). NOTE: Map 4. constraints on Installation of Septic Systems, not scanned.
  • Item
    Taneytown and Emmitsburg Quadrangle Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Weigle, James M.
    Quadrangle Atlas No. 16. Includes Sheets: Map 1. Slope of Land Surface (SLOPE). Map 2. Depth to Water Table (WT). Map 3. Availability of Ground Water (GW). Map 4. Constraints on installation of Septic Systems (SS). Map 5. Locations of Wells and Springs (WS).
  • Item
    Manchester Quadrangle Hydrogeologic Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Otton, Edmond G.
    Quadrangle Atlas No. 15. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells, Springs and Test Holes (WS). Map 3. Depth to the Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Littlestown Quadrangle Hydrogeologic Map
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Weigle, James M.
    Quadrangle Atlas No. 14. Includes Sheets: Map 1. Slope of Land Surface (SLOP). Map 2. Depth to Water Table (WT). Map 3. Availability of Ground Water (GW). Map 4. Constraints on installation of Septic Systems (SS). Map 5. Locations of Wells and Springs (WS).
  • Item
    Lineboro Quadrangle: Hydrology
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Duigon, Mark T.
    Quadrangle Atlas No. 13. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells, Springs and Test Holes (WS). Map 3. Depth to the Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Hampstead Quadrangle: Hydrogeology
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1981) Duigon, Mark T.
    Quadrangle Atlas No. 12. Includes Sheets: Map 1. Slope of the Land Surface (SLOPE). Map 2. Locations of Wells, Springs and Test Holes (WS). Map 3. Depth to the Water Table (WT). Map 4. Availability of Ground Water (GW). Map 5. Geohydrologic Constraints on Septic Systems (SS).
  • Item
    Mount Vernon and Piscataway Quadrangles Geologic and Environmental Atlas
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1978) Glaser, John D.
    Quadrangle Atlas No. 8. Includes Sheets: Map 1. Geologic Map (GEO). Map 2. Mineral Resources and Mined Land Inventory (MRMLI). Map 3. Geologic Factors Affecting Land Modification (LM).
  • Item
    Reisterstown Quadrangle: Geology and Hydgeology
    (Baltimore: Department of Natural Resources, Maryland Geological Survey, 1983) Duigon, Mark T.
    Quadrangle Atlas No. 7. Includes Sheets: Map 1. Geologic Map (GEO). Map 2. Slope of the Land Surface (SLOPE). Map 3. Locations of Wells and Springs (WS). Map 4. Depth to the Water Table (WT). Map 5. Availability of Ground Water (GW). Map 6. Geohydrologic Constraints on Septic Systems (SS).